Rc Hobbies

TM-8 Module and R608FS Receiver Installation Manual

TM-8 Module and R608FS Manual

If you see the R608FS slightly different in appearance from standard Futaba receiver. it is true that R608FS has combined two separate antennas into the design that allows it to receive radio frequency transmissions in two different locations. Futaba dual antenna differences, or DAD, then seamlessly selecting the best signal reception between these antennas for ensure that there is no loss of signal so it will be safer when you fly a model airplane. but if you want know a specific installation about this TM-8 Module you can download Installation Manual here 

If you expect the best results from R608FS recipient, please follow or let refer to the instructions that have been recommended by Futaba:

1. For storage in rc models you have to wrap it with foam or rubber intention is that this receiver diminalkan effects of vibration plane or helicopter. Another purpose minimize vibration occurs on the receiver so that the receiver in the quiet condition.

2. To get the wide reach or get more distance sure the antenna mounted straight.

3. If possible, make sure that the two antennas placed at 90 degrees to each other. Please note:
This is not a critical number, however, the most important thing is to keep the antenna away from each other as as much as possible.

4. If your model includes a conductive metal items may affect the ability of the receiver to accept the obvious
radio frequency signals, we recommend the installation of receiver so that the receiver antenna out both sides
models. This will allow the best radio frequency signals Any condition to fly attitude.

5. Make sure that the antenna is at least half "of conductive materials such as metal and carbon. Please note: this does not apply to the coaxial antenna. It is important, however, to not bend coax, or antenna within a tight radius

6. If the airframe is made of a conductive material such as as metals and carbon, the antenna MUST
positioned so that they come out of the fuselage. Also, do not attach the antenna itself for this fuselag
explains the rules of the receiving installation R608FS which may be very useful for your security.