Rc Hobbies

Electricity in the Turnigy 9x settings described in the following schematic flow diagram may be helpful for those of you who are looking for this information. other discussion about turnigy 9xr firmware,module and telemetry data i will try to give you in next post. thank you and stay tuned.

Turnigy still talking, but this time I share information about Turnigy 9xr schematic diagram. of course if you are a person who likes to pry the remote control / transmitter definitely need this diagram to learn therefore I am sharing here. you should know that the above scheme I found on the forum is not my owner so I just helped you

Actually, this way I quote from the manual of  Turnigy 9XR is intended to facilitate the setting is a radio transmitter. so if you're wondering how to do the settings for Turnigy 9XR in this case to edit and save this is how. As a rule once a value is changed it is saved. You can turn off your Tx and turn it back on and the values will be saved. The values are saved internally in the MCU's eeprom. However there is a slight delay sometimes so it's probably a good idea to wait a couple of seconds before turning off.

There is no undo functionality. Once something is erased/changed it's changed for good. Generally, when a value is highlighted and you cannot move left or right then pressing [UP]/[DOWN] will change that value. When moving left or right is possible you need to press [MENU] to edit that value. Edit-mode is displayed by the cursor blinking. To exit edit-mode press either [MENU] or [EXIT]. Also, it is possible to change values with the P3 pot (the one at the front of the Tx called PIT. TRIM/AUX 2).


On Startup- Quick Model Select
On startup holding a certain key will load an associated model memory. This is useful for quickly
changing between model memories:
• Holding [MENU] Will load Model memory #1
• Holding [EXIT] Will load Model memory #2
• Holding [DOWN] Will load Model memory #3
• Holding [UP] Will load Model memory #4
• Holding [RIGHT] Will load Model memory #5
• Holding [LEFT] Will load Model memory #6
Hopefully can help.

Turnigy accucell 6 manual, you should read before using this charger, the subject described the dangers that may be caused if you do not follow instructions correctly use.

In this accucell Turnigy guide, you will know how to do programming for faster future use. This charger supports up to 6 lipo batteries to be able to do simultaneously charging you require additional other accecories. to get the Turnigy accucell 6 user manual can be found on this page

Turnigy Charger Manual

Using Lithium Polymer (LiPo) will not be separated from recharging. here we share the manual charging by using 2S/3S Turnigy Charger. charger is not as popular as others, but I'm sure most people would need this guide.you are always advised to read every guide for security. on 2S/3S Turnigy Charger Manual explained that before using it, make sure all instructions are done right. this is to prevent the bad things that could possibly happen. Turnigy Charger 2S/3S guide can be found here.